Download Center
Contact us
Direct Restoration Solution
Create a high-quality product series, improve clinical operational efficiency, and create domestically produced high-end dental restoration materials to safeguard national oral health.
1.Bonding
2.Cavity Lining
3.Filling
4.Shaping
5.Polish
1.Bonding
Using DX BOND AdhesivePerform direct repair bonding;
Clean, blow dry, apply adhesive Wait 10 seconds, air blow 5 seconds, and light cure 20 seconds;
2.Lining cavity wall
Utilize the DX Flow to complete lining cavity wall.
Firstly, inject Dentec flow resin (low viscosity) onto the gingival wall adjacent to the cavity, with a thickness of about 1mm. Use a probe to assist in adjusting the position of the flow resin in the cavity, avoiding the formation of bubbles and promoting the adhesion with the dental tissue. Cure under 40S light.
3.Filling repair
Using light cured resin to fill and repair the treated cavities;
Using light cured resin to fill the adjacent wall from the buccal and lingual palatal sides, with a thickness of about 1mm, under illumination, and gradually layered towards the coronal direction to complete the resin filling, with a thickness of about 2mm per layer. Each layer is illuminated for 40 seconds until the occlusal surface shape is restored;
Resin activation - Layered filling - UV curing (20S)
4.Shaping
Using filling instruments to complete the shaping and carving of the cervical and labiopalatine developmental grooves, as well as the shaping and carving of the occlusal ridge;
5.Polish
Using dental polishing wheels, a three-step polishing method is efficient and fast.
Double-layer staggered polishing wheel provides fine polishing for composite resin, glass ionomer and other materials.
